Technical Conditions Of Hydraulic Press

1. The technical requirements of the drawings and technical documents of the hydraulic press shall comply with the provisions of the relevant current standards and shall be approved in accordance with the prescribed procedures before they can be used in production.
2. The design shall have a reasonable layout, beautiful shape, safe and reliable performance, sensitive and light operation, and the manual operating force shall not exceed 49N (5kgf) and the pedal force shall not exceed 78?4N (8kgf).
3. Wear-resistant measures shall be taken for important guide rails, columns, pistons, etc. The working surface of the slider guide (or the surface of the slats) and the working surface of the body track shall maintain the necessary hardness difference.
4. Parts, components or equipment weighing more than 15kg must be easy to lift and install, and lifting holes or lifting hooks (rings) shall be provided when necessary.
5. The hydraulic press and its parts packaged in whole or in part shall comply with the current standards and relevant regulations for transportation and loading.
6. The assembled parts should have relevant installation identification marks. Plate-type or tubular valves must be properly oriented during installation, and the openings of pipelines and hydraulic components should have dust prevention measures.